/Pre-painted steel products/Standard packaging – Pre-painted coils
STANDARD PACKAGING PRE-PAINTED COILS
To ensure and guarantee maximum product protection, Marcegaglia Carbon Steel supplies different types of packaging for pre-painted coils.
PV1-PV4-PV7
- 8 mm thick card inner sleeve a)
- internal corner protector with steel collar b)
- external corner protector with steel collar
- fastening of external corner protector with heat-sealed circumferential plastic strapping
- 17 mm radial steel strapping arranged at 120° x3
a) PV1-PV4: on request
b) PV4-PV7: with reinforced thickness of 2.50 mm
PV2-PV5-PV8 POLYETHYLENE/RESIN-COATED PAPER
- 8 mm thick card inner sleeve a)
- polyethylene or resin-coated paper for external coil/ring protector
- internal corner protector with steel collar b)
- external corner protector with steel collar
- fastening of corner external corner protector with heat-sealed circumferential plastic strapping
- 17 mm radial steel strapping x3 arranged at 120°
a) PV2-PV5: on request
b) PV5-PV8: with reinforced thickness of 2.50 mm
PV11
- 8 mm thick card inner sleeve
- polyethylene or resin-coated paper for external coil/ring protector
- internal corner protector with steel collar with 2.50 mm reinforced thickness
- external corner protector with steel collar
- fastening of internal and external corner protector with circumferential strapping and radial iron strapping x3 at 120° angles
- contact fastening of coil using heat-sealed circumferential plastic strapping
- forklift moveable wooden coil holder saddles
- 4/5 mm rubber band between the strip and the saddle
PV3-PV3S – PV6 – PV9 – PV3M-PV6M-PV9M
- 8 mm thick card inner sleeve if required
- polyethylene or resin-coated paper for external coil/ring protector
- external steel shell a)
- external steel plate protection b)
- internal corner protector with steel collar c)
- steel bumper disc
- external corner protector with steel collar d)
- fastening of external corner protector with circumferential strapping x3 and radial steel strapping x4
a) For PV6 and PV9
b) For PV3-PV3S
c) with reinforced thickness of 2.50 mm
d) PV3M, PV6M and PV9M: perforated steel collar
d) For PV3M, PV6M and PV9M
PV12
- 8 mm thick card inner sleeve if required
- internal corner protector with steel collar
- external corner protector with steel collar
- fastening of corner external corner protector with heat-sealed circumferential plastic strapping
- 17 mm radial steel strapping x3 arranged at 120°
- vertical axis hole
- palletised exclusively on fumigated and branded wood
- fastening of the strip to the pallet using 4 straps, 1 per side
PV15
- 8 mm thick card inner sleeve
- polyethylene or resin-coated paper for external coil/ring protector
- internal corner protector with steel collar with 2.50 mm reinforced thickness
- external corner protector with steel collar
- 4/5mm rubber band beneath the external steel corner
- internal and external steel shell
- steel ring protector
- fastening of the metal crate with 3 radial iron strapping positioned at 120°
- contact fastening of coil with circumferential plastic strapping
PV18
- plastic corner protector for interior corners
- plastic corner protectors for the external corners: make incisions to ensure adhesion to product
- dual-layer polypropylene for external coil/ring protection
- corrugated plastic internal hole protector: the hole must be sealed using wide adhesive tape on the internal corner
- metal crate packaging with internal and external steel plate protection, fastened with circumferential strapping
- protection of the ring with steel disc
- internal corner protector with steel collar
- perforated steel collar for protection of external corner
- external collars fastened with a minimum 2 circumferential strapping
- fastening by minimum of 3 radial strapping arranged at 120°