/Sheets/Steel sheets from cold rolled coils
STEEL SHEETS FROM COLD ROLLED COILS
The entire Marcegaglia product range of sheets from cold rolled coils divided in terms of thickness, width, grades and manufacturing standards.
PRODUCT RANGE
| Thickness (mm) | Width (mm) | ||||
| 1000 | 1250 | 1500 | |||
| 0,35 | • | • | |||
| 0,4 | • | • | |||
| 0,5 | • | • | • | ||
| 0,6 | • | • | • | ||
| 0,8 | • | • | • | ||
| 1,0 | • | • | • | ||
| 1,2 | • | • | • | ||
| 1,5 | • | • | • | ||
| 2 | • | • | • | ||
| 2,5 | • | • | • | ||
| 3 | • | • | • | ||
| Feasible length 200 ÷ 12000 mm | |||||
GRADE | MANUFACTURING STANDARD
| DC01 LC/C290÷690 DC03 LC/C290÷590 DC04 LC/C290÷590 DC05, DC06 |
EN 10139 Cold rolled uncoated mild steel narrow strip for cold forming |
| HC220P, HC260P, HC260LA, HC300LA, HC340LA, HC380LA, HC420LA | EN 10268 Cold rolled steel flat products with high yield strength for cold forming |
| DC01, DC03, DC04, DC05, DC06 |
EN 10130 Cold rolled low carbon steel flat products for cold forming |
| DC01EK, DC04EK | EN 10209 Cold rolled steel for vitreous enamelling |
| DC06-S | Marcegaglia Standard Cold rolled steel for deep drawing |
| DC01-RTF | Marcegaglia Standard Cold rolled detensioned steel for direct use |
| Upon request: supply of grades not included in the above mentioned standards or grades according to customers’ standards, including major automotive manufacturers. | |
STANDARD DELIVERY PROGRAM
| Thickness (mm) | commercial sizes (mm) | ||
| 1000×2000 | 1250×2500 | 1500×3000 | |
| 0,4 | • | • | |
| 0,5 | • | • | |
| 0,6 | • | • | • |
| 0,7 | • | • | • |
| 0,8 | • | • | • |
| 0,9 | • | • | • |
| 1,0 | • | • | • |
| 1,2 | • | • | • |
| 1,5 | • | • | • |
| 2,0 | • | • | • |
| 2,5 | • | • | • |
| 3,0 | • | • | • |
SURFACE CONDITIONS ACC. TO EN 10139
| Surface appearance | MA (standard) MB (improved) MC (superior) |
| Surface finish |
RR rough > 1,6 µm
RM normal 0,6÷1,9 µm RC improved ≤ 0,9 µm RL semi-bright ≤ 0,4 µm RN bright ≤ 0,2 µm |
SURFACE CONDITIONS ACC. TO EN 10130
| Surface appearance | A (standard) B (improved) |
| Surface finish |
r rough > 1,6 µm
m normal 0,6÷1,9 µm g semi-bright ≤ 0,9 µm b bright ≤ 0,4 µm |
SUPPLY CONDITIONS
|
