loading

/Coils/Cold rolled coils

COLD ROLLED COILS

The whole Marcegaglia product range of carbon steel cold rolled coils for structural, funiture and other different applications, divided by thickness, width, grades and manufacturing standards.

PRODUCT RANGE
Thickness (mm) Width (mm)
1000 1250 1500 1530
0.25 ÷ 0.30
0.30 ÷ 0.34
0.35 ÷ 0.39
0.40 ÷ 0.49
0.50 ÷ 0.59
0.60 ÷ 0.69
0.70 ÷ 0.79
0.80 ÷ 0.89
0.90 ÷ 0.99
1.00 ÷ 1.19
1.20 ÷ 1.29
1.30 ÷ 1.39
1.40 ÷ 1.49
1.50 ÷ 1.69
1.70 ÷ 2.10
2.11 ÷ 2.39
2.40 ÷ 2.50
2.51 ÷ 3.00
GRADE | MANUFACTURING STANDARD
DC01, DC03,
DC04, DC05, DC06
EN 10130
Cold rolled low carbon steel flat products for cold forming
DC01EK, DC04EK EN 10209
Cold rolled steel for vitreous enamelling
DC06-S Marcegaglia Standard
Cold rolled steel for deep drawing
DC01-RTF Marcegaglia Standard
Cold rolled detensioned steel for direct use
HC260LA, HC300LA, HC340LA,
HC380LA, HC420LA,
HC180Y, HC220Y, HC260Y
EN 10268
Cold rolled steel flat products with high yield strength for cold forming
M660-50K, M890-50K,
M800-65K M1000-65K,
M1050-50K, M1200-65K,
M340-50K, M390-50K,
M390-65K, M450-50K,
M450-65K, M520-65K,
M560-50K, M630-65K
EN 10341
Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state
M310-50K Marcegaglia Standard
Cold rolled electrical non-alloy steel in the semi-processed
M1800-100K Marcegaglia Standard
Cold rolled electrical non-alloy steel in the semi-processed
DC01LC-P (STP 0032) Marcegaglia Standard
Cold rolled electrical steel for high performance shearing
FE360 UNI 7958
Structural steels
RAD-1 (STP 0044)
RAD-2 (STP 0108)
Marcegaglia standard
Steel for radiators
DC01-TM (STP0057)
DC35-TM (STP0069)
Marcegaglia standard
Steel for the furniture industry
FUS-M (STP 0055)
FUS-M2 (STP 0107)
FUS-F (STP 0056)
Marcegaglia standard
Steel for drum packaging
Full hard steel grades are available for specific galvanizing requirements Marcegaglia standard
Full Hard steels
Upon request: supply of grades not included in the above mentioned standards or grades according to customers’ standards, including major automotive manufacturers.
SUPPLY CONDITIONS
  • Tolerances according to EN 10131 for width ≥ 600 mm (and other equivalent international norms)
  • Special tolerances upon request
  • Surface protection: dry or oil pickled (0.5 to 2 g/m2 each side)
  • Control documents 2.1, 2.2, 3.1, 3.2 according to EN 10204 and other specific norm requirements

Request of information

    Name *
    Email *
    Subject